Xiaomi Mijia Roborock Vacuum Cleaner 2
With the new plant bionics system, it can control the water by itself. When it is working, water come out, if it stop working, the mop will not overflow.
- Sweep and mopping function
- Automatic area cleaning
- Powerful cleaning performance
- Enhanced sensors
Precision water tank filter
Plant bionic water tank filter is used to link the water tank and the mop. The filter can absorb water automatically and keep enough water content.
Mop and water tank fit tightly
The connection of mop cloth and the water tank is designed as slot + paste type. The mop cloth is connected with the water tank closely, no crimping when moping. The mop cloth is as wide as the main brush. Sweep first and then mop, cleaning the floor effectively.
Drawer disassembly design
Plant bionics water tank with the drawer disassembly design, you can design directly insert the tank into the bottom of the machine. It is vey convenient.
Intelligence area cleaning
Equipped with a high-precision LDS sensor. The LDS sensor will scan the room at 5 x 360 degrees per second. Create a room map in real time with the SLAM algorithm, planning the edge cleaning and Z-type cleaning path.
Custom cleaning prefereces
You only need to drag the scan box on the phone map (via Mijia APP) to set the cleaning area.
App remote control
Touch the phone map to issue a command and the cleaning robot will travel towards the target. It will automatically avoid obstacles. Only need to set anyone target point, the robot can build the map during the journey automatically.
Cleaning performance improved
- 5200mAh battery
- Barrier height 2cm
- 2000Pa suction
Vacuum tornado cleaning system
With high static pressure fan, the float fit the ground closely, coordinate the side brush and roller brush. It helps to clean the floor deeply.
Washable filter
With E11 grade filter and there is waterproof Teflon substrate covered outside. It can maintain 95% filtration performance under the normal washing after one year.
The barrier heaight is increased from 1.5cm to 2.0cm
5200mAh battery
Using the capacity 5200mAh lithium battery, it has 2.5 hours of battery life in the standard mode. The maximum housing area is about 250 square meters.
Anti hair design
Using the anti-hair design of the main brush, side brush, and wheel. Prevent the hair from entering the bearing stuck to the motor.
Intelligent identification of carpets
It can intelligently identify the carpet and open the maximum suction force, after leaving the carpet, it will be back to normal suction.
Low noise design
Comes with closed silence cotton and porous air sieve, it will be quieter when it is working.
- Sensor upgrade – 3mm slight collision, increased soft bufer crash to protect the furniture.
- Omnidirectional pressure sensor – with this sensor, the robot is automatically avioded obstacles after the crash to protect the laser sensor.
- Cliff sensor – With 4 cliff sensor to avoid falling
- Wall sensor – It always keeps a distance of about 10mm from the wall when it is working.
- Double electronic compass – To identify the virtual walls which are more accurate.
- Drop sensor – By detecting whether the wheel is pressed to determine whether the machine was lifted. If the robot leaves the ground, it will shut down automatically.
App monitoring
Download the Mijia APP, you can view the progress of the cleaning, setting the cleaning time, remote control the robot, customize the robot name and voice packets and one key to upgrade the root system.
Charging back technology
180-degree infrared coverage, maximum range about 4m. It will be more accurate to lock the charging seat. Charging base also has perfect protection of over-current, over voltage, short circuit.
Charging back
The root will back to the charging dock and recharge automatically after finish cleaning. When the power is low, it will also recharge and get on the unfinished work.
New charging back type
Mi robot cleaner 2 using the LDS sensors to find the charging base.
Durable, solid modular design
- Charge dock
- Charging cable
- Water tank
- Mopping Pad
- Brand
-
Xiaomi
- Battery
-
5200mAh
- Suction
-
2000Pa